At Lifeplus Medical, we know how vital your ResMed Lumis 100 BiPAP machine is for your health and comfort. While this machine is reliable, you might sometimes run into minor issues. The good news? Most of them are easy to fix!
Here are the most common errors and how to fix them:
1. High Leak Alert
If you see a “high leak” message, it means too much air is escaping from your mask. This could be because your mask isn’t tight enough or not fitting well. Check the mask seal, adjust the straps, and ensure no cracks or tears in the mask or tubing. Sometimes, replacing an old mask helps, too.
2. Low Pressure Warning
Low-pressure alerts usually happen because of a blockage. Check the tubing for any bends or holes, and make sure the air filter isn’t clogged. Regular filter changes can keep your ResMed Lumis 100 BiPAP Machine working at its best — grab replacement filters anytime from Lifeplus Medical.
3. Humidifier Error
If your machine complains about the humidifier, it might not be seated properly. Open up the humidifier chamber, clean it, dry it, and pop it back in firmly. Sometimes, just reattaching it correctly clears the error.
4. Power Failure
Double-check the power cord and outlet if the machine suddenly turns off or shows a power error. Try plugging it into a different outlet to see if that helps. If your area has frequent power cuts, using a backup battery can save you a lot of hassle.
5. General Error or Beeping
A simple restart can work wonders if your Lumis 100 is beeping or showing a random error. Turn the machine off, unplug it, wait a minute, and then plug it back in. If the problem keeps returning, it’s best to call ResMed support or your equipment provider.
Need replacements, or are you looking to upgrade your BiPAP machine? Shop confidently at Lifeplus Medical — your trusted partner for all ResMed equipment and supplies.